hp-laptop-dns-server-not-responding-windows-10

HP Laptop DNS Server Not Responding In Windows 10

In some situations, while using your Windows 10, you might face the “DNS Server is not responding in Windows 10” issue. You will not be able to connect to the internet, even though you have connected all the devices correctly on your network.

DNS Server Not Responding In Windows 10

Let us see how to resolve the DNS server not responding in windows 10 issue when you are using an HP laptop with a Windows 10 operating system:

Note: The methods described below can also be used on a Windows 7 or Windows 8 HP laptop.

Before we start with the troubleshooting process, you need to take care of a few things:

  • First, back up your router settings.
  • Next, update your router’s firmware.
  • If needed, refer to your router manual to obtain more information about this issue.

Nevertheless, if you follow the instructions in the following methods correctly, you don’t have to open your router manual. Let us see what those instructions are:

Method-1:

  • The very first method is to try changing the DNS server address manually. To achieve the same, make use of these instructions:
  • Power up your HP laptop running on Windows 10 OS, go to Start. Then, go to your Control Panel.
  • Now, open Network and Internet. Then, select Network and Sharing Center.
  • Choose the Change adapter settings option.
  • You will find a list of Network adapters. Here, select the Network adapter that you are currently utilizing. Right-click it and select the Properties option to fix the DNS server not responding in windows 10.
  • In the Wireless Network Connection Properties window, click the Internet Protocol Version 4 (TCP/IPv4) option.
  • Now, the Internet Protocol Version 4 (TCP/IP v4) Properties window will appear.
  • In this window, under General, click the radio button next to the Use the following DNS server addresses option.
  • In the text box provided next to Preferred DNS server, enter 208.67.222.222
  • In the text box provided next to Alternate DNS server, enter 208.67.220.220
  • Select the checkbox for the Validate settings upon exit option.
  • When you are done, click the OK button.
  • Now, in your Router configuration, you will have to enter the same DNS server address.

Method-2:

In case the above instructions (for changing the DNS server address manually) do not help, then try installing and configuring OpenDNS. Then, check if this method is helpful. If both the first and second methods fail, go on to Method-3.

Method-3:

  • In your Network adapter settings window, try entering the Physical Address. To achieve the same, follow these instructions:
  • On your HP laptop, go to Start. Type in CMD and press the Enter key.
  • The Command Prompt window will now open. Here, type in IPCONFIG /ALL
  • Find your Network adapter. Note down your Physical Address.
  • Now, return to Start and type in NCPA.CPL
  • Next, right-click your Network adapter and select the Properties option.
  • In the Wireless Network Connection Properties window, click the Configure button.
  • Now, carry out the following instructions:
  • After clicking the Configure button, a new window will open. In this window, click the Advanced tab. Select the Network Address option to fix the DNS server not responding in windows 10.
  • Click the radio button provided for the Value field. Now, enter the Physical Address, which you noted down earlier. While entering the address, please do not forget to remove the dashes within the address.
  • Click the OK button.
  • Finally, reboot your HP laptop.
  • Find out the model of your Network adapter and visit the manufacturer’s website.
  • Locate the appropriate drivers. Then, update them. Check if your “DNS Server is not responding” issue has been resolved.

Method-4:

One last fix is to disable your Firewall. Check if this step solves the problem.

We have discussed the various methods of resolving the “DNS server not responding in windows 10” issue. One or more of the above methods should help you fix the problem.